The breeding heater is composed of stainless steel fin heating pipe, intelligent thermostat and low-noise fan. The electric heating tube has high calorific value, large heat dissipation area, no smoke, no smell, no open flame, and long service life. Power from 5 kW to 50 kW, multi-channel control.

The intelligent thermostat can set the start and stop temperature according to the user's needs, automatically start when the temperature is lower than the start temperature, and automatically shut down when the temperature is higher than the stop temperature, without manual and intelligent thermostat.

Equipped with low noise copper wire motor axial flow fan, the motor power ranges from 90 watts to 1.5 kilowatts, with large air volume, low noise and long service life.

Triple protection, one temperature control probe: phase loss protection, overheating power failure, delayed air supply. Once the motor stops running, if the required temperature has not yet reached the required temperature, the electric heating tube will continue to work, which will easily cause the temperature in the chassis to be too high and cause some hidden dangers. Adding an overheating protection probe will make the chassis reach a certain temperature. After that, force the electric heating tube to power off to stop the heating work. Delayed air supply can make the electric heating pipe reach a certain temperature when the equipment is turned on for the first time, and then turn on the fan to blow hot air, so as to avoid blowing out cool air. It will be very high, control the fan to delay and continue to blow, until the temperature in the chassis is lowered, the fan will stop working. The temperature control probe can monitor the ambient temperature in the breeding house in real time.

Under normal temperature conditions, the heating area varies from 50 to 600 square meters depending on the power. The required temperature for brooding is about 38 degrees, and the heating area is halved. The specific heating area depends on the area of use, different insulation measures, and different ambient temperatures.