Electric heaters are suitable for many occasions such as homes, tents, hotels, hotels, offices, etc. The heating device of the cabinet heater is automatically controlled, and the temperature can be adjusted and set by itself. The entire working process is completed by a digital thermostat and is equipped with a light signal. When the green light is on, the cabinet heater stops heating. Energy efficient, unlike boilers, which operate day and night throughout the heating season, can be folded, and the cabinet heater can be taken out of service when the weather is warm.

The following introduces the precautions when the electric heater is operating:

1. Keep the voltage of the electric heater the same as the voltage specified by the product;

2. Note: Do not cover the air inlet or air outlet of the electric heater with objects, so as not to damage the electric heater;

3. Do not use electric heaters close to the human body for a long time to avoid skin burns due to heat accumulation;

4. It is strictly forbidden to stack flammable and explosive items around the product; do not place the product on flammable items such as carpets and plastic mats;

5. The use environment of the product should avoid dust or moisture, so as not to affect the service life of the product;

6. If the product fails, please do not disassemble it without authorization, ask an electrician to check and repair;

7. Do not let children play with the product to avoid injury.

The following are the precautions for the installation of electric heaters:

1. The electric heater should be installed away from flammable, explosive and other dangerous goods and gases.

2. The electric heater should be installed in a dry place indoors, even if it is outdoors, you need to be careful not to get wet.

3. The installation space of the electric heater shall be well ventilated and shall not be used in a sealed box.

4. The air inlet of the electric heater should not be blocked, and the air outlet should also be connected to the pipeline with thermal insulation materials. Note: The piping should avoid "four-way", it should not be too long, too thin, too bent or too much.

5. When the electric heater is installed, the air outlet should be within the range of 15° up and 10° down, and the left and right sides of the fuselage should be tilted within 15°.

6. The air temperature sent by the air outlet duct and electric heater may be very high. To avoid burns, stay away from it.

The above are the operation precautions and installation precautions of the electric heater. If you need to know other content, you can consult us, and we will serve you wholeheartedly.